24V Solar COB Neon Light Strips Waterproof 2835 120LEDs/M 8 Modes On/Off with Remote Control Flex LED Strip Home Garden Decor

Note

All newly delivered light strips need to be charged in time and then used after full charge. Whether or not it is not a matter of the quality of the light strip. If it still doesn't light up, please contact our customer service and there will be a corresponding user guide

Specifications：

Type: 24V Solar Powered LED Strip Light

LED Type: SMD 2835

LED quantity: 120LEDs/meter

PCB Size: Width:11mm Height:5mm

Power: 1-13W/m(24V)

Lumen: 20-22LM/LED

Color rendering index CRI >90RA

IP Rate: IP67 waterproof(casing waterproof), can be used outdoor

Cutting Length:5CM

-every 6 LEDs(about 5cm) can be cut at marked position(DC24V)

Lighting Angle: 120 ° ~ 140 °

Is Dimmable: yes(Remote control does not include batteries)

Length: 0.5m / 1m / 2m / 3m / 4m / 5m / 6m / 7m / 8m / 9m / 10m(DC24V)

Lighting Color: White light (6000-6500K)/warm white (3000-3500K)/red light/green light/blue light/golden light/pink/purple light/ice blue/orange

Power connection interface cord length: About 1.2 meter

Operation temperature: -20℃-+45℃

Storage temperature: -20℃-+60℃

View angle: 180

IP67 waterproof light strips can be placed underwater , such as in fish tanks, swimming pools, etc.

Package includes：

Solar Powered LED Strip Light

1X 2835 LED Strip

1X Solar Panel

1X Remote (no battery)

1X Installation screws

1X USB charging

1X Swivel Bracket

Installation preparation

Installation preparation

‌Site selection requirements

1. Choose a position where the sunlight is directly exposed during the day is ≥6 hours to ensure that the solar panels are not blocked by the sun.

2. The light strip can be hung from the wall, bracket or paved flat on the ground (some models support ground insertion)‌

‌Component Connection

3. Connect the light strip to the solar panel through a waterproof interface to confirm that the buckle is completely locked‌

Models equipped with remote control must first be aligned with the front of the light strip and press any function keys to complete the pairing‌

Charging and startup

‌1. Charging method‌

‌Solar Charging‌: Place the solar panels in the sun during the day to automatically charge (recommended daily charging)‌

‌Emergency cable charging‌: Connect the charging cable through the USB interface to recharge the charge (applicable on rainy days)‌

‌2. Turn on the light to trigger ‌

Most models support automatic light control: the light is automatically turned on when the light is dim to 15-20lux‌

Press "ON" to force the remote control, press "OFF" to turn it off immediately

Charging and startup

‌1. Charging method‌

‌Solar Charging‌: Place the solar panels in the sun during the day to automatically charge (recommended daily charging)‌

‌Emergency cable charging‌: Connect the charging cable through the USB interface to recharge the charge (applicable on rainy days)‌

‌2. Turn on the light to trigger ‌

Press "ON" to Turn it on, press "OFF" to turn it off immediately

3.Power display light

There is a power display, which makes it easier for you to charge solar panels in time

4.8 modes for switching the light strips in solar panels

Conmbination

In Waves

Sepuential

Slow Glow

Chasing/Flash

Slow fade

Twinkle/Flash

Steady On

Maintenance and precautions

‌1. Daily maintenance‌

Regularly wipe the dust on the surface of solar panels with a soft cloth to maintain photoelectric conversion efficiency‌

It is recommended to reclaim indoor storage when it is below -10℃ in winter (except for lithium battery anti-freeze models)

‌2. Troubleshooting‌

Check whether the battery polarity is installed correctly when the light strip is not on (the positive electrode is facing the lamp head/the negative electrode is facing the tail)‌

Repairing is required when the remote control fails (hold the "ON" and "2H" keys at the same time to reset for 3 seconds)‌